CSR Edmonds, Руководство по эксплуатации продукта

Страница: 9 / 16

9
Installation—Speed Control Mode
The speed controller has 4 operating modes. These are selectable
via the 4 position selector on the controller box.
To adjust use a 2mm flat screwdriver to turn the switch to the
desired position. This can be done whilst the product is running.
The default starting position is LO.
MODES:
LO (Default) - Continuous operation, low speed, low flow rate,
very quiet, very low power consumption.
MED - Continuous operation, moderate speed, moderate flow
rate.
HI - Continuous operation, high speed, high flow rate.
AUTO - This setting is not suitable for the ecoFAN™ when used
as a sub-floor ventilator
If in Auto mode the ecoFAN™ will automatically adjust the fan speed
dependent on temperature. It will turn off below 30°C. The fan speed
will gradually ramp up through to maximum speed at 45°C.