CSI Alfa Laval SolidC-1, Инструкция по эксплуатации

Страница: 24 / 38

CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
5 Maintenance
Study the instructions carefully. The items refer to the parts list and service kits section.
Lubricate the rubber seals before fitting them.
* : Relates to the shaft seal.
5.6 Adjustment of shaft
S Stteepp 11
1. Loosen screws (61).
2. Pull off stub shaft (7).
N NO OTTE E
Always use Alfa Laval genuine parts and ensure screws do not
protrude from shaft.
TD 247-035/1
S Stteepp 22
1. Push stub shaft (7) onto the motor shaft.
2. Check that the clearance between the end of the stub shaft
and the motor flange is 10-20 mm (0.4-0.8”).
TD 247-046/1
10-20 mm (0.4-0.8”)
S Stteepp 33
1. Tighten screws (61) lightly and evenly.
2. Ensure that stub shaft (7) can be moved on the motor shaft.
S Stteepp 44
Fit back plate (25), washers (20) and nuts (21) and tighten.
TD 241-027/1
S Stteepp 55
1. Fit impeller (37) on stub shaft (7).
2. Ensure that the clearance between the impeller and back plate
(25) is correct by using the tool supplied ((1 mm). 0.039”)
TD 241-037/1
S Stteepp 66
Tighten screws (61) evenly to 18 Nm (13.3 lbf-ft).
TD 241-036/1
24