CSI Alfa Laval SolidC-1, Инструкция по эксплуатации

Страница: 15 / 38

CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
5 Maintenance
Maintain the pump carefully. Study the instructions carefully and pay special attention to the warnings!
Always keep spare shaft seals and rubber seals in stock.
See separate motor instructions.
Check the pump for smooth operation after service.
5.1 General maintenance
S Stteepp 11
!
A Allw waayyss read the technical data thoroughly. (See chaper 6 Technical data)
A Allw waayyss disconnect the power supply when servicing the pump.
N NO OTTE E
All scrap must be stored/discharged in accordance with current rules/directives.
S Stteepp 22
!
N Neevveerr service the pump when it is hot.
D Daannggeerr ooff bbuurrnnss!!
TD 241-014/1
S Stteepp 33
!
N Neevveerr service the pump with pump if pressurised.
C CA AU UTTIIO ON N
Fit the electrical connections correctly if they have been removed
from the motor during service.
C CA AU UTTIIO ON N
Pay special attention to the warnings!
TD 241-018/1
Atmospherie pressure
required!
S Stteepp 44
R
Reeccoom mm meennddeedd ssppaarree ppaarrttss::
Order service kits from the service kits list
(see chapter 7 Parts list and service kits).
O Orrddeerriinngg ssppaarree ppaarrttss
Contact your local Alfa Laval sales company.
N Noottee::
If the pump is supplied with FEP O-rings, Alfa Laval recommends that the casing O-ring is replaced during pump maintenance.
15