046121
Model PROIWT Communication Interface
Revision:
C
User Manual
3
1.0 Cautions and Limitations
•
Failure to properly use and maintain this product could result in injury or death.
•
Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration as
specified by Biomarine Inc.
•
The ongoing effectiveness and reliability of any protective breathing equipment is dependent upon the
user/owner’s expertise in using and maintaining the equipment.
•
The user shall reference and abide by all cautions and limitation provided in the BioPak 240R
respirator manuals.
•
The user shall reference and abide by all cautions and limitation provided in the Innovative Wireless
Technologies (IWT)
SENTINEL
TM
Wireless Mesh Communication and Tracking System manuals.
•
The model PROIWT Communication Interface is suitable for use only with the Biomarine BioPak
240R respirator and associated PRO PP facemask.
•
The PROIWT components have not been evaluated for use in applications involving direct open
flame or high radiant heat.
•
The PROIWT components have not been evaluated for use in applications that may expose the user
to chemical, biological, radiological, or nuclear agents (CBRN).
•
DO NOT attempt to fit the PROIWT Communication Interface to any other manufacture or model of
respirator or facemask other than the BioPak 240R respirator or the PRO PP facemask.
•
The user bears full responsibility for properly maintaining this equipment including inspections,
cleaning, maintenance, and care.
•
The facemask and installed PROIWT components shall be thoroughly cleaned and disinfected prior
to each use.
•
If the respirator is going to be utilized without the services of the PROIWT communication interface it
is strongly suggested to remove the interface components from the facemask and re-install the
original facemask voice emitter front guard.
•
The PROIWT Communication Interface may be used with IWT Part Number FAA9100-411 speaker
microphone only.
•
The PROIWT Communication Interface has been MSHA approved for intrinsic safety ONLY when
properly interfaced with the following Innovative Wireless Technologies communication systems.
SENTINEL
TM
Wireless Mesh Communication and Tracking System
MSHA Approval No: 23-A120005-0
•
HEARING PROTECTION WARNING:
This communications product is designed to produce a
specific audio output level at a maximum rated power. Many countries now have regulations defining
the amount of noise that an individual can be subjected to during a normal workday. The duration of
exposure, and the level of ambient noise will affect compliance to these regulations. Compliance is
application dependent, and standards vary. It is the SOLE RESPONSIBILITY of the end user to
determine applicability of and compliance to local hearing protection regulations.
