CS CS1210L, Руководство пользователя

Страница: 10 / 13

NO LCD signal
A. Disconnect the charger from the AC outlet
Check connections to battery and ensure they
are good
B. Check to ensure that there is power at the
AC outlet by plugging in a table lamp or power meter
LCD Signal is ON, No charging current
A. Battery is not connected
B. The battery may be damaged or below 2 volts,
charge process will not begin. In this case the
"Bad Battery" light will be on
BAT LOW signal is ON
Battery voltage is under 9V
BAD BAT signal is ON The battery is worn out or is possibly defective
Suggest replacing with a new battery
The charger is charging but the 20-100%
signal does not come on
A. The battery is worn out or is possibly defective
Suggest testing and/or replacing with a new battery
B. The battery may have an excessive current draw
caused by a potential short circuit. Disconnect
battery from charger. Suggest testing and/or
replacing battery
C. The charged battery is larger than the charger
marked capacity (shown in manual) Please
recharge with larger current charger
Pb Charging mode Lead-Acid Battery Charging Model
6 Stage Charge, Conditioning and Maintenance Process Map
TROUBLE MESSAGE LIGHTS CHECKLIST