CS Instruments FA 300-2 Ex Скачать руководство пользователя страница 3

FA 300-2 Ex

is a 4-20 mA loop powered instrument, that generates a current flow according

to the measured humidity or dewpoint.

Ex factory, various measurement values can be assigned to the analogue output such as:

dewpoint, relative humidity, absolute humidity in mg/m

3

, g/m

3

and g/kg, ppm V/V. The scaling

of the analogue output is adjustable as required.

Manufacturer:

Typ discription:

Fa. CS INSTRUMENTS GmbH

Typ                            Protection class

Am Oxer 28c

D-24955 Harrislee

FA 300-2 Ex      

Ex ia IIC T4

www.cs-instruments.com

Protection class/Marking:

• FA 300-2 Ex: Intrinsic Safe

• Marking       

II 2 G  Ex ia IIC T4

According to EN 60079-0:2004

and DIN EN 50020/8:2003

3

NOTES ON SAFETY

DESCRIPTION

Vor Inbetriebnahme lesen!

Achtung:

Druckbereich >50 bar bei Standardversion 

nicht überschreiten. Bei Sonderversion bis 350 bar.

Messbereiche das Messwertaufnehmers beachten!

Bei Überhitzung werden die Fühler zerstört.

Zulässige Lager- und Transporttemperatur sowie die

zulässige Betriebstemperatur beachten

(z. B. Messgerät vor direkter Sonneneinstrahlung schützen).

Bei Öffnen des Geräts, unsachgemäßer Behandlung

oder Gewaltanwendung erlöschen die Gewährleistungsansprüche!  

Einstell- und Kalibrierarbeiten nur durch qualifiziertes

Personal aus der Mess- und Regeltechnik durchführen lassen.

Wichtig: Vor der Installation kurz Druckluft abströmen lassen um Kondensat und 

Partikel zu entfernen. Verhindert die Verschmutzung des FA 300. 

Stehende Luft führt zu langen Messzeiten.

S I C H E R H E I T S H I N W E I S E

B E S C H R E I B U N G

Please read prior to operation!

Warning:

Don’t exceed pressure range.

Observe measuring ranges of sensor!

The probes are damaged if overheated.

Observe max. storage and transport temperature

as well as max. operating temperature.

(e.g. protect measuring instrument from direct sunlight).

Warranty claims no longer apply if the instrument is opened,

in the case of inexpert handling or use of force.

Adjustment or calibrations should be carried out by qualified

measurement and control engineering staff from CS INSTRUMENTS GmbH.

Содержание FA 300-2 Ex













Отзывы: