Crytec D50MB, Руководство оператора

Страница: 22 / 30

MINI TRACKED DUMPER
20
GB
Inspect for any loose or damaged parts.
Repair or replace damaged parts and
tighten loose screws, nuts or bolts.
Store your unit on flat ground in a clean,
dry building that has good ventilation.
STORAGE
If the mini tracked dumper will not be used for
a period longer than 30 days, follow the steps
below to prepare your unit for storage.
Drain the fuel tank completely. Stored fuel
containing ethanol or MTBE can start to go
stale in 30 days. Stale fuel has high gum
content and can clog the carburetor and
restrict fuel flow.
Start the engine and allow it to run until
it stops. This ensures no fuel is left in the
carburetor. Run the engine until it stops.
This helps prevent gum deposits from
forming inside the carburetor and possible
engine damage.
While the engine is still warm, drain the oil
from the engine. Refill with fresh oil of the
grade recommended in the
Engine Manual
.
Use clean cloths to clean off the outside of
the machine and to keep the air vents free
of obstructions.
1.
2.
3.
4.
6.
5.
Do not use strong detergents or
petroleum based cleaners when
cleaning plastic parts. Chemicals
can damage plastics.
Do not store the machine with fuel
in a non-ventilated area where fuel
fumes may reach flame, sparks,
pilot lights or any ignition sources.
6. Remove the M10 × 60 bolt, washers and nut
from the driving wheel.
7. Pull out the whole track with driving wheel.
ENGINE MAINTENANCE
Refer to the Engine Manual included in
your unit for the information on engine
maintenance. Your engine manual provides
detailed information and a maintenance
schedule for performing the tasks.
When removing or installing the
tracks, be careful not to get your
fingers caught between the track
and pulley.
M10 × 60
( × 1)
Driving Wheel