Crytec D50MB, Руководство оператора

Страница: 21 / 30

MINI TRACKED DUMPER
19
GB
Do not over-tighten your track.
The adjustment of the track and
the brakes are linked. The braking
power will lessen the more the track
is tightened.
If the adjustment bolt has no more
adjustment left, the tracks may have
to be replaced.
4. Remove the two M10 nuts and washers from
the side of track protection guard and take
off the track protection guard.
5. Loosen the adjusting bolts and pull the
steering wheel axle toward the engine, then
track will be loosen.
Replacing Tracks
Check the condition of the tracks periodically.
If any track is cracked or frayed, it should be
replaced as soon as convenient.
1. Lift up the hopper and insert a support rod
for safety purposes.
2. Lift the machine and set it on blocks or
supports rated for the weight of the machine
so that the tracks are approximately 10 cm
off the ground.
Support Object
Support Rod
Danger Area
3. Remove the three M8 × 16 bolts and washers
that fix the track protection guard.
M8 × 16
( × 3)
Nut M10
(
×
2)
Track Protection Guard
Steering Wheel Axle
Steering Wheel
Steering Wheel
Steering Wheel Axle
Adjusting Bolt