CRYSTALCLEAR 12 GPM, Книжка по обслуживанию

Страница: 7 / 15

Page 7 of 15
Wearing gloves, clean UV lamp with methylated spirits and a clean cloth (if needed) and
carefully insert into the quartz sleeve leaving the pins exposed.
Connect the female 4-pin plug from the ballast (already installed in front cover) to the pins
on the lamp.
Place the cover over the end of the UV unit.
Connect the unit to a power source, turn water supply on and switch on the power. CHECK
FOR LEAKS!
The light on the ballast should come on and turn green.
(A red light on the ballast indicates a failed lamp and/or ballast. Turn the unit off and
check your lamp connection. If red light remains, replace the lamp and check. If still
not working, replace ballast as well.)
Replace front cover and secure with screws.