RCS1921R Rugged Router
RCS1921R User Guide
Page
5
of
18
HANDLING PRECAUTIONS
This product has components that may be damaged by electrostatic discharge (ESD).
ELECTROSTATIC DISCHARGE (ESD)
To protect the equipment from electrostatic discharge, observe the following precautions when
handling or storing the equipment or its components:
1.
Always use a grounded wrist strap at the workstation or ground frequently by touching
the metal chassis of the system before handling any components. The chassis must be
connected to an earth ground.
2.
Use antistatic padding on all work surfaces.
3.
Avoid static-inducing carpet areas.
4.
Keep the electronic components in its static shield bag until ready to perform
installation or after removing it from the router.
5.
Always handle the memory or expansion cards by the edges.
6.
Do not touch the input/output connector pins.
BATTERY DISPOSAL
The following applies to any battery that might be on any board installed in the RCS1921R
Router equipment:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the m