RCS1921R Rugged Router
RCS1921R User Guide
Page
10
of
18
INSTALLING THE PRODUCT IN AN EQUIPMENT RACK
Using Fixed Mounting Brackets
To install RCS1921R Router with fixed mounting brackets in an equipment rack, complete the
steps and see
Figure 1
below:
1.
Line up eight holes on the sides of the rear mounting brackets with eight holes on the sides
of the chassis and secure with 16 (eight per side) 8-32 x 0
ee #2 in
Figure 1).
It may not be possible to line up all holes. If more than three holes do not line up on
each side, please contact Technical Support.
2.
Line up four holes on the front mounting ears at the desired level on the front of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0
provided (see #3 in Figure 1).
3.
Line up four holes on the rear mounting ears at the desired level on the rear of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0
rack screws
provided (see #4 in Figure 1).
Fixed Mounting Brackets Parts List
ITEM
DESCRIPTION
1
MOUNTING EAR, EXTENDED SLOT
2
SCREW, 8-32 X 0.375", 82D PHL FH, SS
3
SCREW, PHIL TRUSS HEAD 10-32 X 0.75"
4
SCREW, PHIL TRUSS HEAD 10-
Table 1
Figure 1
Figure 1
: Fixed Mounting Brackets