RCS1921R Rugged Router
RCS1921R User Guide
Page
11
of
18
Using Crystal Slides
To install RCS1921R Router with Crystal Slides in an equipment rack, complete the following
steps and see
Figure 2
below:
1.
Loosen adjuster screws.
2.
Line up the top and bottom holes on the front & rear mounting ears at the desired level of
the equipment rack, and attach to the rack using four (two per side) 10-32 x 0.50
screws provided (see #1, #2 and #5 in Figure 2).
It may not be possible to line up all holes. If more than three holes do not line up,
please contact
Technical Support
.
3.
Tighten adjuster screws.
4.
Line up the router side slots with the slides and gently push to install in the rack.
5.
To secure the router when transporting or when extension of router is not necessary, screw
two 10-32 x 0
to the middle hole of the front bracket ears (see #1 and #4).
Crystal Slides Parts List
ITEM
DESCRIPTION
1
FRONT MOUNTING EAR, SLIDE
2
REAR MOUNTING EAR, SLIDE
3
GUIDEBAR, T-SLOT SLIDE
4
SCREW, PHIL TRUSS HEAD 10-
5
SCREW, PHIL TRUSS HEAD 10-
6
SCREW, 8-32 X 0.375 FHD 82D, SS
Figure 2
Not all chassis support Crystal Slides
Table 2
Figure 2
. Crystal Slides