Crystal Vision Up-and-down, Руководство пользователя

Страница: 21 / 29

Crystal Vision
Using the front control panel
Up-and-down User Manual R2.5
20
18/03/2009
Up-and-down Menu Structure
Video Control Menu
Output standard, aspect ratio and detail enhancement are all controlled from this menu.
Up-and-down Video control menu
Description
From the Home menu, press F1 to select the Control menu,
which is then traversed by rotating the shaft control.
Rotate shaft encoder to select Output Selection.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value.
Standard Definition,1280 x 720p, 1920 x 1080i.
Press enter to accept the new value.
Rotate shaft encoder to select the Aspect Ratio.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value.
Compromise 16:9, Full Image, Fill Screen, Anamorphic
Press enter to accept the new value.
Rotate shaft encoder to select the Detail control.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value
(0-100%).
Press enter to accept the new value.
Note:
1. At all times the output line rate will follow the input line rate, i.e. 50Hz, 59.94Hz.
2. If the input video standard is the same as the set output, the message
No ARC
will be displayed.