Crystal Vision Up-and-down, Руководство пользователя

Страница: 16 / 29

Crystal Vision
Card edge operation
Up-and-down User Manual R2.5
15
18/03/2009
Aspect Ratio controls
From the CONTROL top menu press ENTER then SCROLL to access either Output standard,
Aspect Ratio selection or Detail control. Press ENTER to select Aspect Ratio. These control
will be inactive whilst in bypass mode.
Menu Comment
Full image
Full 4:3 source width compressed to central 75% of 16:9 monitor
width. Full source height mapped to monitor height. Vertical black
bands added to both sides, no picture loss. (4:3 Pillarbox)
Full 16:9 source width mapped to 4:3 monitor width. Full source
height compressed to 75% of monitor height. Horizontal black bands
added to top and bottom, no picture loss. (16:9 Letterbox)
Full screen
Full 4:3 source width mapped to 16:9 monitor width. Central 75% of
source height stretched to monitor height. Significant picture loss.
Central 75% of 16:9 source width stretched to 4:3 monitor width.
Full source height mapped to monitor height. Significant picture loss.
Compromise
Full 4:3 source width compressed to central 87.5% of 16:9 source
width. Central 87.5% of source height stretched to monitor height.
Vertical black bands added left and right. Minimal picture loss.
(14:9 Pillarbox)
Central 87.5% of 16:9 source width stretched to 4:3 monitor width.
Full source height compressed to 87.5% of monitor height.
Horizontal black bands added to top and bottom. Minimal picture
loss. (14:9 Letterbox)
Anamorphic
Full 4:3 source width horizontally stretched to 16:9 monitor width.
Full source height to map to monitor height. No picture loss but
significant distortion.
Full 16:9 source width mapped to 4:3 monitor width. Full source
height stretched to monitor height. No picture loss but significant
distortion.
Detail enhancement
From the CONTROL top menu press ENTER then SCROLL to access either Output
standard, Aspect Ratio selection or Detail control. Press ENTER to select Detail. This
control will be inactive whilst in bypass mode.
Menu Comment
Detail
Rotate the Scroll/Adj. control to set the amount of detail
enhancement required. Press enter to action change. Adjustment 0-
50.