Crystal Vision
Appendix 1
Note: For further information on Statesman configuration please refer to the
Statesman manual.
Control Descriptions
The controls of ViViD 3G are accessible from the front panel, the board edge or from
Crystal Vision’s Statesman software. The description of controls used in this manual is
based on Statesman but the path to locate controls via the front panel or board edge
follows the same logic. For instance, in the Statesman GUI the ‘Input Frozen’ control is
located in the ‘
Video Status’
group of the ‘
Status’
tab. To find the same control using
the card edge or front panel follow the path
Status->Vid Status
to the
Input Frozen
control.Statesman GUI controls are located in a number of tabs each containing panels
which mostly contain the controls. Some controls are LEDs that are used to show
status, others are check boxes, buttons or sliders which change various ViViD 3G
settings.The description of the tabs are in the order shown in the GUI i.e.
STATUS, CONTROL, SYNCHRONISER (‘3GS and 3GS-20’ models only), DELAY,
YUV, RGB, ALARMS, PRESETS AND RESET.
Each tab is shown with a screen grab and description of each control’s function.
Status (3G and
3G-20)
The board status is shown using a mixture of simulated LEDs
and text information. As a general rule a green LED shows a
good condition such as input present. An amber LED will give a
warning as with video black or video frozen. If a LED turns red
this is a fault condition. A greyed LED will indicate an absence
such as non-alarm or non-warning status.
Status
Vid Status
Input Present
On when video input present.
Input Standard
Shows input video standard e.g.
1080p 50.
Input Black
On when input video is black level.
Input Frozen
On when input video is frozen.
ViViD 3G User Manual R1.4
38
19 January 2021