Crystal Vision Indigo ViViD 3G Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 47

Crystal Vision Indigo ViViD 3G Скачать руководство пользователя страница 38

Crystal Vision

Appendix 1

9 Appendix 1

Statesman

In July 2014, Statesman control of ViViD 3G was superceded by VisionWeb control.
Statesman is no longer supported after this date, but information for existing users is included
in this appendix.

Introduction

The Crystal Vision Statesman PC control software is designed to control a range of
Crystal Vision modules via Ethernet control from a PC. Statesman provides a user
friendly means of configuring and operating Crystal Vision modules with the benefit of
“see-at-a-glance” status monitoring.

The main Statesman application communicates with each module in a frame through
a Statesman-capable front panel CPU or full active control panel. Either of these must
be fitted to the frame to allow Statesman control.

Statesman operation

The initial view will show an Explorer style view of the connected frames and
modules. Double clicking on a module will enable the display of the main application
menus.

The two large control panes shown in the upper and lower halves of the window may
display different menus for the same card, or controls for different cards. Click on the
horizontal button-bar between the two panes to close the lower pane or drag the
button to vary the size of the panes.

ViViD 3G User Manual R1.4

37

19 January 2021

«
...
36
37
38
39
40
...
»

Содержание Indigo ViViD 3G
















































Отзывы:

Нет отзывов