Crystal Vision
Statesman
Presets and Engineering
The Presets menu allows up to 16 preset memories of the control state of the entire CoCo 3G
module to be saved and recalled.
Presets and engineering controls
To store a preset:
•
Ensure ‘Enable GPI Preset Recall’ is unchecked
•
Select an appropriate preset by checking a radio button
•
Click on ‘Store’ to save the preset
To recall a preset:
•
Ensure ‘Enable GPI Preset Recall is unchecked
•
Select an appropriate preset by checking a radio button
•
Click on ‘Recall’ to recall setup data from the selected preset
‘Enable GPI Preset Recall’ should not be checked whilst presets are being created or recalled
by this menu to prevent inadvertent GPI operation. Check ‘Enable GPI Preset Recall’ when
finished if required.
Note:
Other interfaces such as the CoCo 3G Controller or an active control panel may also
interfere with saving or recalling presets.
Recalling factory default values
The reset button may be used to recall default values for all setup controls. This is a
convenient way to re-initialise the board in the unlikely event of any suspected malfunction.
Factory reset default settings
CoCo 3G User Manual R1.7
42
11 January 2021
