Crystal Vision
Using the front control panel
Note:
There may be a delay whilst the frame is interrogated during which time the ‘No cards Found’ could be
displayed.
The top line of the display will show ‘Available Cards X’, where X is the number of cards that
have responded so far to the polling request.
4.2 The CoCo 3G active panel menu structure
At any time the main top-level menu (Home) is obtained by pressing the HOME key.
From the home menu further selections can be made. Active function keys are indicated
by illuminated, integrated LEDs.
The main top-level menus for the CoCo 3G are obtained by pressing the F1-F4 keys from
the HOME menu. Menu keys are illuminated when active and when further menus are
available.
The top-level menus are:
•
Status – Press F1
•
Levels (RGB and YUV gains and thresholds) – Press F2
•
Misc (Gamma controls, wipes and crops) – Press F3
•
Presets (User presets and factory reset) – Press F4
When a sub menu has been selected, further options may be obtained by using the Shaft
control to scroll through them. Once the desired option has been located a selection or
value change can be made by either toggling the appropriate function key or by selecting
and using the shaft control to alter a numerical value. A configuration change or value
will be activated as the shaft control is rotated or function button is toggled. The variable
being adjusted will appear in brackets. If the variable updates in real time it will be
contained within square brackets [Medium] or if the change requires to be accepted
angular brackets will be used < >. Pressing Enter will fix the new value.
The following chart shows the available CoCo 3G menus. The actual menus available
may vary slightly as software is updated.
CoCo 3G User Manual R1.7
27
11 January 2021
