Crystal Vision
Using the active front panel
Demon 2 User Manual R1.4
31
07/09/2012
Configuring GPIs
Pressing F3 from the home menu will bring up the GPI menu. The GPI menu provides
access to the various GPI configuration, delay and reset sub-menus. Rotate the shaft
encoder to select each sub-menu and also change parameters.
Demon 2 GPI control menu
Description
From the Home menu, press F3 to select the GPI
menu, which is then traversed by rotating the shaft
control.
Rotate shaft encoder to select Black Alarm delay.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value (0-240sec).
Press enter to accept the new value.
Rotate shaft encoder to select the Preset menu.
Press F1 or F2 to select to change the value.
Rotate shaft encoder to select location.
Press F1 to save configuration.
Press F2 the recall the configuration
Rotate shaft encoder to select Reset.
Press F2 to select.
Press F3 to confirm.
All values will be reset to their default values and all
presets erased.
Rotate shaft encoder to select Factory Default.
Press F2 to select.
Press F3 to confirm.
All values will be reset to their default values.
All preset configurations will be retained.
