Crystal Vision
Using the front control panel
16
DEC102SUser ManualV1.0 05/11/03
The DEC102S menu structure
The main top-level menus are obtained by pressing the F1, F2 and F4 keys from the
HOME menu. Menu keys are illuminated when active and when further menus are
available. The three top-level menus are:
•
CONF (Configuration) – press F1
•
LEVEL (Level adjustment) – press F2
•
TIME (Input/output timing and phase) – press F4
The following chart shows the available DEC102S menus. The actual menus available
may vary slightly as software is updated.
The DEC102S menu tree
Note:
Function keys and shaft encoder LEDs are illuminated when active.
Menus or function keys associated with the shaft encoder for changing assigned values
are shown with a black circle.
Menu numbering scheme
This manual uses a simple menu numbering convention based on the sequence of keys
required to reach each menu from the top level home menu. For example, menu 1.1.2 is
reached from the home menu by pressing F1, then F2. Menu 1.2.3 is reached by pressing
F2 and then F3.
