Crystal Vision
Statesman
8
DEC102SUser ManualV1.0 05/11/03
Output settings
Output settings are as follows:
Output setting
Description
8 bit/10 bit/Auto
Force 10 or 8 bit output quality or allow automatic selection.
VBI Blanked
/Unblanked
VBI data blocked or passed unprocessed (unblanked) on luminance channel
Pedestal (NTSC
only)
ON: 7.5 IRE subtracted from black level, gain increased
OFF: Black level and gain settings assume no 7.5 IRE offset
Note:
Vertical Blanking Interval data is normally present in PAL on lines 7-22 and 319-335 and in
NTSC on lines 10-20 and 273-282.
Status
Status indications are as follows:
Input setting
Description
Input presence
Green when input detected. Grey when no input detected.
Reference present
Yellow when analogue reference detected. Grey when no input detected.
Note:
Refer to the installation section for details of the external analogue reference input loop or
terminate link on the module itself.
