Crystal Vision
Hardware installation
13/01/05
5
DDAA132 User Manual R7.2
2 Hardware installation
The DDAA132 serial digital to analogue composite converter fits into all Crystal Vision
frames. All modules can be plugged in and removed while the frame is powered without
damage.
2.1 Universal rear connectors
When used with a single height rear connector, the 4U Indigo frame will house up to 24
modules and up to three power supplies, the 2U Indigo frame will house up to 12 modules
and dual power supplies, the 1U Indigo frame will house 6 modules and a single power
supply. The desk top box has a built-in power supply and will house up to two modules
with a single height rear connector.
The 4U, 2U and 1U frames have hinged front panels which give access to the PSU and all
modules. The desk top box has a removable front. The universal frame wiring system
allows any of the interface range of modules to be fitted in any position with the use of
removable rear modules.
The DDAA132 may be used with the RM01 single slot rear connector, the RM02
quadruple slot rear connector and the RM18 double slot rear connector.
Rear module connections with RM01
RM01 fits in all frames
Description
RM01
•
24 modules in 4U,12
modules in 2U, 6 in 1U & 2
in a desk top box
•
All frame slots can be used
BNC
Connection
SDI IN
Serial digital input
SDI OUT(1)
Reclocked serial digital output
SDI OUT(2)
Reclocked serial digital output
SDI OUT(3)
Reclocked serial digital output
PAL/NTSC/Y
Composite video or Y plus sync (set by PL5)
PAL/NTSC/C
Composite video or C (set by PL4)
