Crystal Vision
Hardware installation
DDA108A-BP User Manual R1.0
4
25/02/10
3 Hardware installation
The DDA108A-BP digital video distribution amplifier fits into all Crystal Vision rack
frames. All modules can be plugged in and removed while the frame is powered without
damage.
3.1 Universal rear connectors
When used with a single height rear connector, the 4U Indigo frame will house up to 24
modules with up to four power supplies, the 2U Indigo frame will house up to 12 modules
and dual power supplies, the 1U Indigo frame will house 6 modules and a single or dual
power supply. The 1U desk top box has a built-in power supply and will house up to 2
modules with a single height rear connector.
The 4U, 2U and 1U frames have a hinged front panel which gives access to the PSU and
all modules. The desk top box has a removable front. The universal frame wiring system
allows any of the interface range of modules to be fitted in any position with the use of
removable rear modules.
The DDA108A-BP may be used with the RM01 and RM38 single slot rear connector, the
RM02 quadruple slot rear connector and the RM18 double slot rear connector.
Rear module connections with RM01
RM01 fits in all frames
Description
RM01
•
12 modules in 2U, 6 in 1U &
2 in a desk top box
•
All frame slots can be used
BNC
I/O assignment
SDI OUT(1)
DVB-ASI/SDI Output
SDI IN
DVB-ASI/SDI Input
SDI OUT(2)
DVB-ASI/SDI Output
SDI OUT(3)
DVB-ASI/SDI Output
SDI OUT(4)
DVB-ASI/SDI Output
SDI OUT(5)
DVB-ASI/SDI Output
