ADC104OperationalManualV3_2
Crystal Vision
Page
18
19/09/05
5 Installation
The ADC104 series of analogue component to SDI converters are single height modules,
which will fit into all Crystal Vision rack frames. The FR2AV 2U frame will
accommodate up to 12 single height Crystal Vision modules and six single height
modules will fit in the FR1AV 1U frame. The 1U high Desk Top Box DTB-AV will
house up to 2 modules and has a built-in power supply. All modules can be plugged in
and removed while the frame is powered without damage.
5.1 Rear modules and signal I/O
FR2AV FR1AV and DTB-AV frame rear connectors
Up to twelve single height modules may be fitted in a FR2AV frame depending on the
choice of rear connector. The two types of rear connector available provide system
flexibility by allowing a mix between access to all connections and maximum module
packing density. The available rear connectors are as follows:
RM01
FR2AV RM01 rear connectors
Description
RM01
•
12 modules per FR2AV
frame
•
All frame slots can be
used
General Label
Name
(ZLA00073)
Special Label Name
(ZLA00089)
Description
SYNC/OPD
SYNC IN
Reference analogue sync in
U/B/OPB
U/B IN
U or Blue component input
Y/G/OPA
Y/G IN
Luminance or Green component input
SDI2
SDI OUT (2)
Serial Digital Output
SDI/1
SDI OUT (1)
Second Serial Digital Output
V/R/OPC
V/R IN
V or Red component input