ADC104OperationalManualV3_2
Crystal Vision
Page
12
19/09/05
Updating the display
The values displayed on an active front panel are only updated when an adjustment is
made and when changing menu level. If mode changes occur through the use of card edge
controls or through automatic response to the input video signal, the text displayed on the
active front panel will not be updated immediately. If necessary, use the upward arrow to
leave and then re-enter a menu to update the display.
3.2 The ADC104 menu structure
The main top-level menus for a module are obtained by pressing the F1, F2, F3 and F4
keys from that module’s HOME menu. Menu keys are illuminated when active and when
further menus are available. The four top-level menus are:
•
Time – press F1
•
Cntrl – press F2
•
Tpat (Test patterns – not ADC104N) – press F3
•
Stat – press F4
The following chart shows the available menus.
The ADC104 menu tree
Note:
Function keys and shaft encoder LEDs are illuminated when active.
Menus or function keys associated with the shaft encoder are shown with a black circle.