Crystal Vision
Using the active control panel
18/02/03
Page
11
Control panel showing available cards
To list the available modules in a frame, press the DEVICE key. The top line of the
display will change to show ‘Available Cards X’, where X is the number of cards that
have responded so far to the polling request. Rotating the shaft encoder will cause the
bottom row of the display to cycle through the successfully polled cards by name and
node number.
When the desired module is selected press the ENTER key to access that module’s
HOME menu.
The ADC104 home menu
Note:
Ensure that DIL lever 10 is set for remote control (DOWN) to use the front control panel.
3.1 Navigating the display
The control panel keys are assigned the following functions when controlling the
ADC104:
•
DEVICE – lists available modules in a frame
•
Asterisk – no function assigned
•
F1 to F4 – soft keys, function assigned within each menu
•
HOME – moves the display to the home menu
•
ENTER – selects module to control
•
CAL – enter or leave statesman mode
•
Upward arrow – used to move up the menu structure
•
Rotary control – shaft encoder used to select options or variable data