Crystal Mountain CMFIWD001, Руководство по обслуживанию, Страница: 15 / 28

10
Installation, Operation & Service Manual – Form 1707001 Rev1
Dispensing ambient temperature water
Ambient water dispensing button
 Place a cup under the water dispenser.
 Press and hold the “Ambient” button to dispense room-temperature water.
Dispensing ice
NOTE
The ice dispenser will stop working while the freezer door is open.
If ice cubes haven’t been used for several days, they may freeze
together and not dispense. If this happens, remove the ice bin, shake
it, then push it back in.
NOTE
The ice dispenser is designed for rapid filling. Make certain that the
intended container is located directly under the dispenser outlet. A
quick press and release is all that is needed for a single fill container.
Dispensing cubed ice
Cubed ice dispensing button
 Place a cup under the ice dispenser.
 Press and hold the “Cubed” button to dispense cubed ice.
Dispensing crushed ice
Crushed ice dispensing button
 Place a cup under the ice dispenser.
 Press and hold the “Crushed” button to dispense crushed ice.
Replacing water bottle or checking water supply line
When the “Low” indicator appears, water dispensing valves, water pump
and water inlet valve will stop working automatically.
 Check if the water bottle is empty and replace it.
 Check if the water supply line (for POU installations) is producing water
and make repairs if needed.
 Press and hold “Lamp/Reset” button for more than 3 seconds until you
hear a long beep to activate the water pump or inlet valve. This is required
when replacing an empty bottle.
 The “Low” indicator will disappear automatically once the water tank is
filled with water.