Crysalli Beverage Systems
a division of WPD
1739 Sabre Street, Hayward, CA 94545
www.crysalli.com
510.732.0100
X0101-B-HEX Faucets
The faucets come with a flow rate
control valve on each one of them.
This valve is located on the right side
of the faucet. It is designed to be
adjusted and set via a metric 2.5 allen
hex wrench to a desired flow. Flow is
typically set based on cup size being
poured into. Adjustments should be
made while the faucet handle is held
open and water flowing, to visually see
the flow setting. Also fill into the glass
or carafe you will typically be using to
judge fill time and minimize splashing.
The slower you can set the flow of
sparkling water, the better the bubble
profile you will get. With the Crysalli
unit on and CO2 set to 75 PSI, adjust
the valve to a full flow position, then
adjust the flow rate from the faucet
down by turning your wrench within a
quarter turn.
Once set, tighten the outer ring with
a wrench to lock the valve in place.
Lock tight can be used on the threads
of the outer ring to help keep it tight.
The valve may need to be periodically
re-adjusted based on use.
Locking flow control
faucet Part# X0101-B-HEX
With hex key adjustment
Flow control adjuster
Outer ring
Adjustable hex fitting
Using a 2.5 hex wrench to
adjust flow rate
