CruzPro MaxRp110, Руководство пользователя

Страница: 42 / 48

Page 42
Appendix H - Error Codes
The internal software that runs the MaxRp110 instrument can detect and display
some software and hardware errors. A listing of those error codes and their
meaning as shown below.
0 Contents of internal nonvolatile memory are corrupted and factory defaults
are being used. Please check and set/reset all alarm values, etc.
1 Unable to communicate with micro U101 - contact dealer
2 Unable to communicate with micro U201 - contact dealer
3 Unable to communicate with micro U301 - contact dealer
4 Unable to communicate with micro U401 - contact dealer
5 Contents of nonvolatile memory corrupted and factory defaults are being
used. Please check and set/reset Total Log.
6 Supply voltage below the minimum 11.2 VDC required to update data to
the nonvolatile memory. Check power.
7 Unable to program or read nonvolatile memory - contact dealer.
8 Error reading Current Configuration Data from nonvolatile memory.
Contact dealer if unable to reprogram.
9 Not used
10 Not used
11 Not used
12 Not used
13 Activation code error - contact dealer.