6
4. Sizing Adjustments
Important Sizing Information for Proper Riding Position
Cruzbike bicycle sizing and fitting criteria are different from upright bicycles. It is very important to
carry out the necessary adjustments to be sure your recumbent fits you properly. A bike that does not
fit properly is unsafe, will be uncomfortable and will be difficult to control and potentially dangerous to
the rider.
See also Section 10 Assembly Instructions for other details on seat position and adjustments.
WARNING
: Fit and size are important; if your bicycle does not fit properly, you may lose
control and fall. If your new bike doesn’t fit, ask your dealer or local bike shop to size it
properly before you ride, or you may have an accident resulting in serious injury or death.
Refer to the photo above for the proper cycling position. Pedal position and handle bar position affect
your comfort, safety and ability to control the bike.
CLOSE QUICK-RELEASE MECHANISMS AND ADJUST PROPERLY: Riding your bicycle with seat
quick-release mechanisms open or improperly adjusted can cause you to lose control, resulting in
serious injury or death.
Step over height
Step over height is the basic element of whether you are suitable to ride a particular Cruzbike. It is
the distance from the ground to the top of the seat pan cushion.
You need to be comfortable that you can swing your leg over the seatback, or lift your leg over the
seat pan. Or you need to be comfortable that you can lie the bike over, step over it and lift it up
between your straddling legs. If you cannot comfortably use at least one of these mounting and
dismounting techniques, then you are not recommended to ride the bike.
WARNING
: If you plan to use your bike for jumping or stunt riding, read Section 2.F again.
Seat position
Correct seat adjustment is an important factor in getting the most performance and comfort from your
bicycle. If the seat position is not comfortable for you, see your dealer or local bike shop.
The seat can be adjusted in three directions:
1. Fore and aft adjustment
See paragraphs 8 and 9 in Section 10 Assembly Instructions.
2. Seat pan angle adjustment
See paragraphs 10 in Section 10 Assembly Instructions.
3. Seat back adjustment.
The seat back recline is adjustable to several different position settings. Newer riders may prefer a
more upright setting. Experienced and performance-oriented riders may prefer a more reclined seat
back.
The seat back can be adjusted by loosening the seat-binding bolt behind the backrest as well as the
seat post quick release. Slide the binding bolt down the seat back rails to further recline the angle.
Pedal Position Adjustment
Rotate the crank until the pedal is forward as far as possible. Sitting on the bike place the heel of your
foot on the center of the forward pedal. Release the Quick Release lever and adjust the telescoping
tube until your leg is absolutely straight. Tighten the Quick Release. This technique should provide a
