DIP switch functions of the RVCVL-82S
DIP 1 – Activate Video in Motion
DIP 2 – Activate rear-view camera
DIP 3 – Activate front-camera
DIP 4 – No function
DIP 5 – CAN-bus termination resistor on the vehicle side
DIP 6 – CAN-bus termination resistor on the head-unit side
PIN Assignment of loose wires on the VL-82S Harness (8-Pin Molex)
Wire Color Pin-No. Assignment
●
Green Pin 6
Activation of the video-in-motion function
(+12V =Video in Motion, only if DIP1=OFF)
●
White Pin 2
Reverse Trigger Output (+12V DC 500 mA)
Only if DIP2=ON and Reverse gear engaged
Note: The interface is installed on the backside of the navigation unit.
CONNECTING THE CAN INTERFACE TO THE FACTORY NAVIGATION UNIT
VL-82S
Harness
RVCVL-82S
CAN Interface
071715
3 / 6
