INTERFACING SOLUTIONS
RVCCH-75F
REAR-VIEW CAMERA INTEGRATION
FOR SELECT DODGE,
CHRYSLER & FIAT VEHICLES
www.cruxinterfacing.com
Rev. 042616
10
HOW TO INSTALL THE BULLET CAMERA
Step 4
. Clean and clear the hole for the camera to be inserted.
Step 5
. Insert the cables and camera through the drilled hole but DO NOT
FULLY INSERT, this will allow you to rotate and camera and position it when
testing the camera view from the 4.3” display in the car.
Step 6
. Route your power and RCA cable towards the front of the vehicle
Step 1
. After you have removed the 3rd brake light from the trunk lid, use
the supplied drilling template to begin drilling the hole on the back side of the
brake light.
Step 2
. Continue drilling through the back and into the front side of that
brake light. This will allow you a guide hole when you begin drilling on the
front side.
Step 3
. Turn over the brake light and continue clearing the hole on the
front side of the brake light. Be very careful when drilling, take your time and
cleanly drill.
Scan the QR code to watch the installation video.
