Crunch CRXR Скачать руководство пользователя страница 4

Functions & Operations Cont.

Front / Rear Input Switch:

 In the FRONT position, the input 

signals coming in through the front channel signals are split and 

directed to the front and rear channels simultaneously. This feature 

is engaged when the source unit has no front / rear or subwoofer 

channel output. In the REAR position, if the source unit has front & 

rear RCA outputs, disengage the rear inputs by placing the switch 

in REAR position.

Left / Right Rear Channel Signal Inputs:

 Connect to the rear 

(L & R) channel output of the source unit. Make sure that the 

REAR INPUT switch is in the REAR Position.

Left / Right Mixed In / Out Terminals:

 As an INPUT terminal, 

connect the subwoofer output of the source unit. As an OUTPUT 

terminal, connect to the front channel input terminal of another 

electronic crossover in a multi-crossover system.

Front Channel High-Pass Frequency Selector:

 In the x1 position, 

the high-pass crossover frequency range is adjustable from 32Hz 

to 400Hz and in the x20 position, the frequency range is adjustable 

from 640Hz to 8KHz. This allows for fine tuning.

Rear Channel High-Pass Frequency Selector:

 Allows selection of 

REAR Channel High-Pass frequency from 32Hz to 400Hz.

Front Channel High-Pass Frequency Multiplier: 

In the x1(times 

one) position,  the Front High-Pass frequency is adjustable 

from 32Hz to 400Hz and the x20(times twenty) the frequency is 

adjustable from 640Hz to 8KHz.

Subwoofer Frequency Selector:

 Adjustment of the Low-Pass 

crossover frequency for the subwoofer channel from 

32Hz to 400Hz.

Bass Boost Switch:

 When activated, this circuit provides a single 

Octave boost of 12dB at 45Hz to equalize the sub enclosure.

Phase Inverter:

 In the “180” Position, the unit shifts the sub output 

signal 180 degrees out of phase relative to the front and 

rear output signals.

Subwoofer Stereo / Mono Switch:

 Selects stereo or mono for the 

subwoofer output. 

Front Channel Output Level Control:

 Allows for adjustment of the 

front channel output signal.

Left / Right Front Channel Output Terminals:

 Connect to the 

amplifier front channel left / right inputs.

16

15

14

13

12

10

9

11

6

17

7

8

Содержание CRXR









Отзывы: