Thank you for purchasing the CRUNCH CRXR 2 / 3-Way
crossover. This model operates as either a 2 or 3-way crossover
with an 18dB / Octave subwoofer crossover with remote gain
control module. This unit will provide filtered signals to front and
rear amplifiers, and Low Pass subwoofer output using a single
pair of inputs. Please read the entire manual to ensure proper
connections and application.
CAUTION
Always consider consulting a professional audio installer
before installing any audio components. Be careful and take
your time. Do not let wires make contact with metal edges or
hot engine components.
Product Features
Bass Boost with Quasi-Parametric Equalization
A sealed enclosure causes the woofers frequency response to roll
off at a rate is 12dB per Octave below the enclosures resonant
frequency. Our Bass Boost Quasi-Parametric Equalization circuitry
provides a single Octave boost at 12dB at 45Hz to ensure smooth
and accurate bass response.
DC / DC Regulated Switching Power Supply
This power supply design provides constant voltage regardless of the
battery’s voltage to ensure constant output performance at all times.
Frequency Multiplier
The front High Pass section is equipped with a frequency multiplier
switch that can be used to multiply the crossover frequency points.
With the additional selectable crossover points, system settings
become precise.
Rear Input Switch
Using this switch, a rear signal output can be delivered from a single
input source without having to use an adaptor to split the input cables.
Front / Rear Inputs with Front / Rear / Sub Outputs
This unit has front and rear pre-amp inputs with front and rear outputs
as well as a constant subwoofer output that is independent of the
fader position on the source unit.
Adjustable Output Level Control
Stereo / Mono Subwoofer Control Switch
Remote Level Control via Under-Dash Module
