7
controller (located on the side of the detector) until you hear it
click. To turn off the detector, rotate the wheel controller in the
opposite direction until it clicks again. You can also use the
controller to adjust the volume level by turning it up or down
within the range that it does not click.
Brightness Control
Press
DIM
repeatedly to toggle between 4 different display
brightness levels:
BRIGHT - DIM - DIMMER - DARK
When signals are detected, alerts are always displayed in
BRIGHT
mode.
The display returns to the previously selected brightness
level after alerts disappear.
Mute on/off selection (mute mode)
Press the
MUTE
button repeatedly for less than two
seconds each time to toggle between
mute on
and
mute off.
Mute on will silence the audio alarm for the remainder of an
existing signal and for any new alert received within 30
seconds of the last signal. Then the unit automatically resets
itself to mute off
, so
the next signal threat can be received.
Mute off
manually restores the audio alert.
You may also adjust the audio level by using the volume
thumb wheel.
Auto Audio Control
With AUTO AUDIO, the detector reports with reduced audio
alarms for any alerts that last longer than 5 seconds. It
holds
the reduced audio level for any new alerts that follow within
60 seconds of the alert that turned AUTO AUDIO on.
130.com.ua
Autogood products «130»
