9
flashes the 4 compass LEDs one after another (clockwise)
until the calibration is completed.
Perform the calibration on a level surface, following these
steps:
•
Turn the detector on. (See Power & Volume Control.)
•
Mount the detector on the windshield or the dashboard in
your vehicle. (See INSTALLING THE DETECTOR.)
•
Press and hold the CALIBRATE button (CITY button)
until you see the detector flashing the compass LEDs
clockwise, one after another.
•
Drive your vehicle in two circles. The size of the circles
and the direction that you drive does not matter. The
circles do not need to be perfect circles but must be
completed in the same direction. Each circle should take
a minimum of 20 seconds but no more than 1 minute to
complete.
•
Press the CALIBRATE button (CITY button).The detector
will end the compass calibration in two beeps and with
the 4 compass LEDs flashing twice altogether. The
compass screen will indicate which direction your
vehicle is pointing. Calibration is now complete.
While the detector is calibrating, the front screen will remain
completely blacked out.
• When to Calibrate:
The compass must be calibrated:
-
When the detector is used for the first time in a vehicle,
and
-
When the detector is mounted in a new location.
• Compass Display:
The compass periscope displays 8
cardinal points.
Tutorial mode
130.com.ua
Autogood products «130»
