5
Conceal the CRUNCH 217B
when you leave your vehicle to
prevent theft and to minimize the unit's exposure to extreme
temperatures, which can temporarily impair performance.
Windshield mounting
1. Install the suction cups onto the
windshield mounting bracket by sliding
them into their holes (if not
pre-installed).
2. Press the bracket base firmly against
the windshield until
the suction cups securely take hold.
3. Slide the unit up to the bracket until the
bracket arms click into the slots on both sides of the
unit.
4. Bend the angle of the windshield mounting bracket, if
necessary, to adjust for best viewing and detection
angle.
5. When you want to connect power from your vehicle,
plug the small connector of the power cord into the
12-voltDC power input jack located on the side of the
detector.
6. Plug the large adapter of the power cord into the lighter
socket of your vehicle.
Dashboard mounting
1. Select an area relatively level, clean, and dry. Adhere
one part of the enclosed hook-and-loop fastener to this
area and the other part to the bottom of the unit.
2. Fasten the unit to the area by placing the hook-and-loop
pieces together.
Connecting the Power
130.com.ua
Autogood products «130»
