background image

2.3 – ROTARY SPEED BUTTON

The large horizontal button labeled ROTARY SPEED is used to control the built-in
Rotary   Speaker   simulator.  When   the   simulator   is   on,   push   this   button   to   switch

between the slow and the fast speeds; push and hold for about half a second for
braking the rotary speaker (stop position). When in brake, push again to return to the

previous   speed.  The  light  will   blink  smoothly   slow  or  fast,   or  will   remain   still,   to
indicate the current speed.

Use   this   button   in  conjunction   with   the   SHIFT  button  for   enabling/disabling   the

Rotary Speaker simulation (see below).

PLEASE NOTE

: if this button seems unresponsive, check the 

HM/FS

 selector on the back

of the instrument. In order to use this button, the selector must be in the FS (FootSwitch)

position. This button cannot be used if an Half-Moon switch is in use. Connections are
explained later in this manual.

2.4 – THE SHIFT BUTTON

The small  

SHIFT

  button on the top left side of the control panel is used for a few

alternate functions:

1. Push   and   hold   the   SHIFT   button   along   with   the   ROTARY   SPEED   button   to

disable or enable the internal Rotary Speaker simulation. If the simulation is

OFF

, the red LED next to the ROTARY SPEED button becomes lit.

2. Push and hold the SHIFT button along with the MANUAL button of the lower

section, next to the 

PEDAL TO LOWER

 indication, to activate or deactivate the

pedal-to-lower function that brings the pedalboard tones to the lower manual.

If this function is active, the red LED will become lit;

3. Push and hold the SHIFT button along with notes, on the upper manual, from

the   second   C   note   to   the   fourth   C   note   to   activate   the   transposition.   If   a

transposition is active, the red LED next to the SHIFT button will become lit. To
cancel the transposition, hold SHIFT and play the third C note (middle C).

PLEASE NOTE

: when the transposition is active, certain notes that are outside the 61-

note playable range will not be available any more. For example, since the last note is C, if
the transposition is up by one semitone, C becomes B, so the C key will become silent. 

CRUMAR MOJO CLASSIC & SUITCASE USER'S MANUAL - Page 7/20

Содержание MOJO Classic Switcase





















Отзывы: