17. SHORTCUTS
Some of the functions that are normally accessed from the Editor web-app can also
be accessed using key-combinations on the command panel. Here's a summary:
–
Switch between the two Combo Organ sounds: use UPPER PRESET A for
Combo Type “F” and UPPER PRESET B for Combo Type “V”.
–
Switch between the four Piano sounds: use UPPER PRESET A for Tine Piano and
UPPER PRESET B for Reed Piano; use LOWER PRESET A for Digital Piano and
LOWER PRESET B for Acoustic Piano.
–
Switch between Square, Triangle and Mono Tremolo: press & hold the multi-
function button n. 20 labeled “FX1”, the effect turns off for a short while then
turns on again with the new setting.
–
Switch between Phaser and Chorus: press & hold the multi-function button n.
21 labeled “FX2”, the effect turns off for a short while then turns on again with
the new setting.
–
Set the split point: press SHIFT + MODE button n. 15, the Split LED starts
blinking, now play the desired split note on the keyboard (you won't hear any
sound), the LED restores its previous position and the split point is now set and
saved.
–
Reset the transposition: press SHIFT + press & hold either button n. 18 or n. 19,
the transpose LED n. 23 should turn off and the transpose amount is now
zeroed.
18. THE USB PORTS
The Mojo 61 includes a Type-A “host” USB 2.0 port. This is mainly used for updating
the software in case a new release is available.
Another interesting use for this port is the possibility to connect a “Class-compliant
USB-MIDI device”, i.e. one of the many MIDI devices that don't need special drivers
when they are connected to a computer. The Mojo 61 will recognize USB-MIDI
devices and will use them along with any other MIDI equipment connected to either
one or both the classic MIDI inputs located on the rear panel. This way you can
connect up to 3 MIDI devices to the Mojo 61, for example a keyboard, a pedalboard
and a control surface.
Please avoid connecting unsupported devices to this port.
An additional Type-B USB 2.0 port is present at the back side of the Mojo 61 that
provides Class-compliant USB-MIDI IN/OUT connection to your computer. Use this
port to connect the Mojo 61 to your computer software. No drivers are needed.
CRUMAR MOJO 61 USER'S MANUAL - Page 23/28
