2. SETUP
1. Ensure that the NVMe Drive eRazer power switch is in the "Off" position.
2. Attach the Drive eRazer to power. You may use the included power adapter or a SATA power connec-
tor from a computer.
3. Connect the Drive eRazer to the drive.
•
U.2 drive: Connect the included U.2-to-OCuLink adapter to the U.2 drive. Then connect the adapt-
er's OCuLink connector and power connectors to the appropriate ports on the Drive eRazer.
•
M.2 drive: Attach your M.2 drive to the included M.2-to-U.2 adapter. Next, connect the included
U.2-to-OCuLink adapter to the other side of the M.2-to-U.2 adapter. Finally, connect the adapter's
OCuLink and power connectors to the appropriate ports on the Drive eRazer.
4. Determine how you want to use the Drive eRazer .
•
To erase the attached drive: Turn on the power switch. The connected drive will power up and the
main menu will appear on the LCD screen. Continue on to the section for how to erase drives.
Section 3: “How to Erase Drives” (page 8)
.
•
To view the drive's contents: Attach a USB cable to the USB Type-C port on the rear of the Drive
eRazer . Next, turn on the power switch. The connected drive will power up and the main menu
will appear on the LCD screen. If the drive is formatted, it will mount to your computer and you
can view its contents.
NOTE
Attached drives cannot be erased when the Drive eRazer is connected to a com-
puter. Disconnect the Drive eRazer from the computer to erase the attached
drive.
TIP
You can use a hex editor or the Drive eRazer App to see the values of specific
sectors on formatted or unformatted drives. This is useful if you need to inde-
pendently verify that a drive has been erased.
NVMe Drive eRazer User Manual
7
