Crown DSi 8M, Руководство по эксплуатации

Страница: 8 / 20

Operation Manual
DSi 8M Cinema System Monitor
page 8
3 Installation
3.1 Materials Required
You will need to supply the following materials:
• Shielded audio cable for connecting the DSi 8M to the
cinema processor and power amplifi er inputs
• Twisted wire for connecting the DSi 8M to non-DSi power-
amplifi er outputs
• Four 10-32 x 1/2” screws to mount the DSi 8M in the
audio equipment rack
• Small standard screwdriver
• No. 2 Philips screwdriver
• Wire strippers
3.2 Mount the DSi 8M
The ideal place for the DSi 8M Monitor Panel is in the sound
rack or projector console between the stereo proces sor and
power amplifi ers. DB25 and HD15 connectors are available
on the back panel to make installation quick and easy.
Alternatively, terminal blocks allow the use of stripped and
tinned wire. They are pluggable for easy service and
troubleshooting.
3.3 Monitor Wiring
1. Connect to AC Power.
Connect the unit to the AC power outlet using the
stan dard IEC cable provided. Any power source from
100-240V , 50-60 Hz will be suffi cient. Plug the
Modular Power Supply into the Bypass Power input and
into a power source that matches the Modular Power
Supply requirements.
(continued)