page 12
DriveCore Install DA Series Operation Manual
Configuring the Network using NetSetter
running an instance of HiQnet software. HiQnet software programs include System Architect, Audio Architect, and Performance Manager.
TIP:
A selected device may have its Venue Data cleared (including all Building, Floor, and Room Venue data) by pressing the
Clear Container
button. This action
takes place on applying current edits only and can be undone with the
Undo Current Edits
button.
NOTE:
The Container/Position Venue Data may not be edited inline.
NOTE:
Devices are not discoverable at the IP or HiQnet level. A device which is not discoverable at the IP level (invalid IP address, etc.) or HiQnet address level
(HiQnet address conflict, etc.) will not be able to report its Container : Position data. In this instance, the Container : Position field will display a "?" to indicate that the
field may exist but that the software does not have enough discoverability of the device to determine the value. A blank field or "-" implies the value is null.
12� Locate
The Locate feature allows a device to be easily identified within a network full of HiQnet devices. Clicking in the Locate column for a device will put the corresponding
networked device into a Locate state—the Locate icon will be displayed on-screen and something will happen on the device to indicate the Locate state is active (e.g.,
an LCD or LED will flash, etc.). Clicking an active Locate icon will disable the Locate state for the device. Disabling the Locate state from the device will clear the icon.
Devices may be put into a Locate state independently from selection so that more than one device can be located at any one time.
Содержание DCi 4 1250DA
Страница 59: ......
