background image

- 5 -

 

 

a.

 

 Turn ignition on. 

b.

 

  Open the door. 

c.

 

 Press Valet/ Override switch for 3 seconds to enter valet mode (ignition valet) 

 REMOTE PANIC 

a.

 

 Press and hold #4 for 3 seconds, the siren will sound and light will flash for 60 seconds. 

b.

 

 Press any button to turn off panic alarm. 

 

CAR FINDER 

a.

 

 Press #4 within 2 seconds. 

b.

 

 Siren will sound 7 times and light will flash 7 times. 

 

SHOCK SENSOR 

a.

 

Sensibility can be adjusted by turning the volume right (more sensitive) and left (less sensitive). 

b.

 

 If the car receives a soft shock, siren chirps 5 times and light flashes 1 time for the purpose of 

protection.  

c.

 

If the car receives a hard shock, siren chirps continuously for the purpose of protection. 

 

 (LAST DOOR) AUTOMATIC (PASSIVE) ARMING - PROGRAMMABLE

 

a.

 

 Turn off the ignition key and exit the vehicle. When last protected entrance is closed, siren chirps 1 

time and LED begins to flash rapidly. 

b.

 

 After 30 seconds, all security systems will be armed automatically (without signal from the 

transmitters). 

  AUTOMMATIC RE-ARMING   

a.

 

 Alarm is disarmed when ignition is not turned to the position of “Off” and if any entrance is not 

triggered for 30 seconds. 

b.

 

  System will activate automatically and close all security to return arming. 

 

2

nd

 CHANNEL 

a.

 

 When ignition is off and all systems are deactivated, press #3 for 3 seconds to operate 2

nd

 channel. 

b.

 

  Momentary output for trunk or continuous output for others can be selected by program (Pre-

programmable) 

 

IGNITION CONTROLLED LOCK / UNLOCK (PROGRAMMABLE)

 

a.

 

Turn the ignition on, then door will be locked after 3 seconds. 

b.

 

Turn the ignition off, then door will be unlocked immediately. 

 

VALET MODE – TWO VALET MODES: TRANSMITTER OR VALET SWITCH

   

a.

 

 In the valet mode: 

1) Sound (siren or horn) and electric securities will not be activated. 

2) Lock / unlock and parking light will be activated.   

b.

 

  Valet (normal) 

1) Turn the ignition on and open the door, then press valet / override switch for 

3 seconds

 until 

siren sounds 1 chirp.   

2) To exit valet mode, turn the ignition off and open the door, then press valet / override switch for 

3 seconds 

until siren sounds 2 chirps. LED will be off. This indicates that system is on already 

valet mode. 

c.

 

 Transmitter (remote) valet :   

1) Turn the ignition on and open the door, then press remote #4 button for 

3 seconds

 until siren 

Содержание CR-3000








Отзывы: