background image

Commercial Audio Series

 

Mixer-Amplifi ers

Operation Manual

page 17

7 Warranty

WORLDWIDE EXCEPT USA & CANADA

SUMMARY OF WARRANTY

Crown International, 1718 West Mishawaka 
Road, Elkhart, Indiana 46517-4095 U.S.A. 
warrants to you, the ORIGINAL PURCHASER 
and ANY SUBSEQUENT OWNER of each 
NEW Crown

1

 product, for a period of three 

(3) years from the date of purchase by the 
original purchaser (the “warranty period”) 
that the new Crown product is free of 
defects in materials and workmanship, and 
we further warrant the new Crown product 
regardless of the reason for failure, except 
as excluded in this Warranty.

Warranty is only valid within the country 
in which the product was purchased.

ITEMS EXCLUDED FROM THIS 
CROWN WARRANTY

This Crown Warranty is in effect only for fail-
ure of a new Crown product which occurred 
within the Warranty Period. It does not 
cover any product which has been damaged 
because of any intentional misuse, accident, 
negligence, or loss which is covered under 
any of your insurance contracts. This Crown 
Warranty also does not extend to the new 
Crown product if the serial number has been 
defaced, altered, or removed.

WHAT THE WARRANTOR WILL DO

We will remedy any defect, regardless of 
the reason for failure (except as excluded), 
by repair, replacement, or refund. We may 
not elect refund unless you agree, or unless 
we are unable to provide replacement, and 
repair is not practical or cannot be timely 
made. If a refund is elected, then you 
must make the defective or malfunctioning 
product available to us free and clear of all 
liens or other encumbrances. The refund will 
be equal to the actual purchase price, not 
including interest, insurance, closing costs, 
and other finance charges less a reasonable 
depreciation on the product from the date 
of original purchase. Warranty work can 
only be performed at our authorized service 
centers. We will remedy the defect and ship 
the product from the service center within a 
reasonable time after receipt of the defective 
product at our authorized service center. 

HOW TO OBTAIN WARRANTY       
SERVICE

You must notify your local Crown importer 
of your need for warranty service within 
the warranty period. All components must 
be shipped in the original box. Corrective 
action will be taken within a reasonable 
time of the date of receipt of the defective 
product by our authorized service center. If 
the repairs made by our authorized service 
center are not satisfactory, notify our autho-
rized service center immediately.

DISCLAIMER OF CONSEQUEN-

TIAL AND INCIDENTAL DAMAGES

YOU ARE NOT ENTITLED TO RECOVER FROM 
US ANY INCIDENTAL DAMAGES RESULTING 
FROM ANY DEFECT IN THE NEW CROWN 
PRODUCT. THIS INCLUDES ANY DAMAGE 
TO ANOTHER PRODUCT OR PRODUCTS 
RESULTING FROM SUCH A DEFECT.

WARRANTY ALTERATIONS

No person has the authority to enlarge, amend, 
or modify this Crown Warranty. This Crown 
Warranty is not extended by the length of time 
which you are deprived of the use of the new 
Crown product. Repairs and replacement parts 
provided under the terms of this Crown War-
ranty shall carry only the unexpired portion of 
this Crown Warranty.

DESIGN CHANGES

We reserve the right to change the design of 
any product from time to time without notice 
and with no obligation to make corresponding 
changes in products previously manufactured.

LEGAL REMEDIES OF PUR-
CHASER

No action to enforce this Crown Warranty 
shall be commenced after expiration of the 
warranty period.

THIS STATEMENT OF WARRANTY SUPER-
SEDES ANY OTHERS CONTAINED IN THIS 
MANUAL FOR CROWN PRODUCTS.       9/07

_______________

1

 Note:

  If your unit bears the name “Amcron,” please 

substitute it for the name “Crown” in this warranty.

Содержание 135MA

























Отзывы: