background image

Commercial Audio Series

 

Mixer-Amplifi ers

Operation Manual

page 2

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. 
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat 

reg isters, stoves, or other apparatus (including amplifi ers) 
that produce heat.

9. Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding-type plug has two 
blades and a third grounding prong. The wide blade or 
the third prong is provided for your safety. If the provided 
plug does not fi t into your outlet, consult an electrician for 
replacement of the obsolete outlet.

Important Safety Instructions

MAGNETIC FIELD

CAUTION!  Do not locate sensitive high-gain equipment such as 
preamplifi ers or tape decks directly above or below the unit. Because 
this amplifi er has a high power density, it has a strong magnetic fi eld 
which can induce hum into unshielded devices that are located nearby. 
The fi eld is strongest just above and below the unit.

If an equipment rack is used, we recommend locating the amplifi er(s) 
in the bottom of the rack and the preamplifi er or other sensitive equip-
ment at the top.

The lightning bolt triangle is used to alert the user to the risk of 
electric shock.

The exclamation point triangle is used to alert the user to 
important operating or maintenance instructions.

REGARDEZ CES SYMBOLES:

La triangle avec le sigle ‘’foudre’’ est employée pour alerter 
l’utilisateur au risque de décharge électrique. Le triangle avec 
un point d’exclamation est employée pour alerter l’utilisateur 
d’instruction importantes pour lors opérations de mainte nance.

ATENCION CON ESTOS SÍMBOLOS:

El triángulo con el símbolo de rayo eléctrico es usado para 
alertar al usuario de el riesgo de un choque eléctrico.

El triángulo con el signo de admiración es usado para alertar 
al usuario de instrucciones importantes de operación o man-
tenimiento.

WATCH FOR THESE SYMBOLS:

IMPORTANT

Commercial Audio Series mixer-amplifi ers require Class 2 output 
wiring.
Les amplifi cateurs de série de Commercial Audio exigent des câbles 
de sortie de classe 2.
Commercial Audio-Reihe-Verstärker verlangen Klasse die 2 
Produktionsverdrah tung. 

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR 
BOTTOM COVERS. NO USER SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 

À PRÉVENIR LE CHOC ÉLECTRIQUE N’ENLEVEZ PAS LES 
COUVERCLES. IL N’Y A PAS DES PARTIES SERVICEABLE 
À L’INTÉRIEUR. TOUS REPARATIONS DOIT ETRE FAIRE PAR 
PERSONNEL QUALIFIÉ SEULMENT. 

PARA PREVENIR UN CHOQUE ELÉCTRICO, NO RETIRE LAS 
CUBIERTAS SUPERIOR O INFERIOR. NO EXISTEN PARTES QUE 
PUEDAN SER REPARADAS POR EL USUARIO AL INTE RIOR. 
REMITA EL SERVICICO AL PERSONAL TÉCHNICAL CALIFI-
CADO.

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE 
AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG 
FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER 
SUPPLY CORD SHALL REMAIN READILY OPERABLE.

POUR DÉMONTER COMPLÈTEMENT L’ÉQUIPEMENT DE 
L’ALIMENTATION GÉNÉRALE, DÉMONTER LE CÂBLE D’ALI-
MENTATION DE SON RÉCEPTACLE. LA PRISE D’ALIMEN TATION 
RESTERA AISÉMENT FONCTIONNELLE.

PARA DESCONECTAR COMPLETAMENTE EL EQUIPO DEL 
SUMINSTRO ELECTRICO, DESCONECTE EL CABLE DE ALI-
MENTACION DE LA TOMA DE CA. LAS PATAS DEL CONEC TOR 
DEL CABLE DE ALIMENTACIÓN DEBERAN MANTENERSE EN 
BUEN ESTADO.

FCC COMPLIANCE NOTICE

This device complies with part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.

CAUTION: Changes or modifi cations not expressly approved by the party responsible for 
complicance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and used 
in accordance with the instruction manual, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

10. Protect the power cord from being walked on or pinched, 

par ticularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

11. Only use attachments/accessories specifi ed by the manufac-

turer.

12. Use only with a cart, stand, tripod, bracket, or table specifi ed 

by the manufacturer, or sold with the apparatus. When a 
cart is used, use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14. Refer all servicing to qualifi ed service personnel. Servicing 

is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate nor mally, or has been dropped.

15. Use the mains plug to disconnect the apparatus from the 

mains.

16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC 

SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR 
MOISTURE.

17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR 

SPASHING AND ENSURE THAT NO OBJECTS FILLED 
WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE 
EQUIPMENT.

18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL 

REMAIN READILY OPERABLE.

Importantes Instructions de Sécurité

Wichtige Sicherheitsinstruktionen

Instrucciones de Seguridad Importantes

Содержание 135MA

























Отзывы: