Crown Boiler TWB Series, Руководство по установке

Страница: 14 / 56

12
VI Air for Combustion and Ventilation
Sufficient fresh air must be supplied for combustion and ventilation. Provisions for combustion and ventilation air for oil
burning equipment must be made in accordance with Section 1.5, Air for Combustion and Ventilation, in the latest edition of
Installation of Oil Burning Equipment (ANSI/NFPA 31).
To ensure an adequate supply of air for combustion, ventilation and flue gas dilution, start by determining whether the
boiler is to be installed in a building of unusually tight construction. A building of unusually tight construction can be defined
as one having the following features:
•
Walls and ceilings exposed to outside atmosphere have a continuous water vapor retarder with a rating of 1 perm or
less with openings gasketed and sealed
•
Weather stripping has been added on openable windows and doors
•
Caulking and sealants are applied to areas such as joints around window and door frames, between sole plates and
floors, between wall-ceiling joints, between wall panels, at penetrations for plumbing, electrical, and gas lines, and
at other openings.
WARNING
• Insufficient combustion air supply may result in the production and release of soot or
deadly carbon monoxide (CO) into the home which can cause property damage, severe
personal injury or death.
• This boiler is not designed for use in a space that is depressurized relative to the outdoors.
Operating this boiler in a depressurized space may cause property damage, severe
personal injury or death.
FIGURE 5.1: INSTALLATION OVER A COMBUSTIBLE FLOOR