15
Access rights are listed below:
-
User code has Area A and/or B or C permission
-
User code can arm and/or disarm arm an area
-
User code can arm and/or disarm arm an area in Stay mode
-
User code can change its code
-
User code can change user
’
s code
-
User code can Operate control Functions
-
User code can change dialer telephone numbers
-
User code can alter the real time clock
-
User can answer an incoming call and start up/down load
-
User can allow access to installer program mode from client mode.
-
Initiate Walk-test mode.
How to Change Master Code
Press
<PROG>
enter
Master code
and
<ENTER>
. The display will show
“
Client Mode
”
.
Press <
PROG
> and
1
to change Master code. Use the numeric keyboard to enter your
new Master code. The code can hold any combination of 1 to 6 digits. It is recommended
using a multi-digit code. . Press <
ENTER
> to save your new code. To proceed to the next
user code, Press <
MEM
>. Press <
PROG
> and <
ENTER
> exit Client Program mode.
How to Add or Change User Code
In client mode, press <
PROG
> and the
User number
(2 to 100) to add or change the
code. Use the numeric keyboard to enter the new code. The code can hold any
combination of 1 to 6 digits. Press <
ENTER
> to
save
your new code.
Repeat the procedure for all users or use arrow (MEM) key to advance to next user.
Press <
PROG
> and <
ENTER
> to exit Local Program mode.
How to Delete User Code
In client mode, press <
PROG
> and the
User number
(2 to 100) you intend to delete.
The display shows the code.
User 3 Code
56789
Client Mode
User 8 Code
8765
www.msealarms.com.au
All manuals and user guides at all-guides.com
