13
How to Read System Messages
Any system failure that may that may occur, is indicated by system messages. System
messages are automatically displayed and are listed in Table 4. Read messages and call
for service.
Table 4: System Messages
Message
Description/Action
Battery Low
The backup battery is low (charger or battery failure)
Main Failure
The main power is disconnected, or caused by power
outage.
Telephone Line Failure
The line is disconnected
Radio Device Battery Low
Replace battery of the particular device
Supervise Detector
Failure
Radio detector failed to communicate
Zone Inactivity Time-out
No movement detected during expected time in this zone
Dialer Kiss-off Failure
Communication fail
How to Read Trouble Messages
Any failure or -abnormal events that may occur are indicated by trouble messages, and
the Trouble indicator is lit.
Press
<
MEM
> to read out messages and other events stored
in memory. Trouble messages are listed in Table 5.
Table 5: Trouble Messages
Message
Description/Action
Zone Tamper
The tamper of a particular zone
System Tamper
Main cabinet open
Pendant Panic
Panic alarm initiated
via radio pendant
Panic
Panic alarm initiated
via keyboard
Fire
Fire alarm initiated
via keyboard
Medical
Medical alarm initiated
via keyboard
Duress code
used
Duress digit pressed by one of the users, under threat
How to Display Events from Memory
The system memory stores the last events.
Press
<
MEM
> to display list of events. The
system will display the last event and automatically scroll to the next one every 2.5
seconds, and a beep is emitted. Use the arrow keys to scroll up manually. Each entry
www.msealarms.com.au
All manuals and user guides at all-guides.com
