3 -
6
1) Clean any debris out of the closet flange (not supplied),
then install the mounting bolts into the slot of the flange
head down with the threaded shank of the bolt pointed
upward as shown (See figure 1).
Slide each bolt until the end of slot.
2) Firmly press a new wax seal onto the circular recess around
the outlet opening (See figure 2).
Figure 1
Figure 2
Figure 3
3) Place the toilet bowl over the
s
ocket and mounting blocks
(See figure 3).
CAUTION:
●
To prevent water and odor leakage, please ensure that
the wax seal is fitted properly between the
s
ocket and the
flange. Do not overtighten the nuts, as damage to the
plastic parts may result.
Figure 4
4) Fit protector sleeves and install side screws.
Cover the screw head with the provided screw-cap
(See Figure 4).
CAUTION:
● In order to prevent leakage, be sure to insert the
toilet all the way into position.
5) Carefully place the lid on top of the tank, making sure that
the push rod colors match the flush valve buttons
;
the grey
flush valve button is for a full flush and the blue button is
for a half flush.
