Crosstour CT8500, Руководство пользователя

Страница: 14 / 100

10
Exposure: -2.0~0~+2.0
Adjust the exposure value when shooting, to make the brightness of the photo more realistic.
White Balance:
Auto/daylight/cloudy/fluoresc./fluoresc.1/fluoresc.2/Incandesc
By adjusting this setting, the camera can correct the color of photos taken under different
lighting conditions.
ISO: Auto/ISO100/ISO200/ISO400/ISO800/ISO1600/ISO3200
ISO refers to the light sensitivity of either the film or imaging sensor.
Beyond simply changing the exposure, ISO also affects image quality. A higher ISO typically
translates to a noisy or “grainy” image.
Effect: Normal/Sepia/B&W/Negative
Change the color of the picture taken.
Contrast: -100~100
Saturation: -100~100
Sharpness: -100~100
System Setting
Language:
English/Español/Portugues/P усский / 简体中文 / 繁体中文 /Deutsch/Italiano/Pol-
ski/Français/
日本語
/ Č estina
Car Mode: Off/On
With this setting turned on, the camera can be used as a dashcam. At this time, the looping
video in the video settings is automatically set to 3 minutes (You could adjust to other interval
manually). And the camera will start recording automatically after power on.
Power Off: Off/1Min/5Min
After a set period of time, if there is no operation on the camera, the camera will automatical-
ly shut down.
Date & Time: ___Y___M___D 00:00:00
Use the UP/Down Button to change the value, use the Shutter/OK Button to turn to next item.
Tips:
Since the camera does not have a built-in battery, once the battery is removed or the
camera is out of power while shooting, the camera's time will be reset to 2018/01/01 when it
powered on at next time, and then you need to reset the time in the setting.
Date Format: None / YYYY MM DD / MM DD YYYY / DD MM YYYY
Stamp: Off/On
Timestamps on photos and videos.
Frequency: 50Hz/60Hz